SM89 - Micro canon électrostatique 22.2mV

15,00 €
HT

Type Pressure gradient/line combination Transducer Condenser Frequency Response 60 to 20,000 Hz Polar Pattern Hypercardioid at low frequencies, lobar at frequencies above 1 kHz, symmetrical about axis Output Impedance Rated at 150 ohms (100 ohms actual) Recommended minimum load: 800 ohms (May be used with loads low as 150 ohms with reduced clipping level) Sensitivity: (at 1,000 Hz) Open Circuit Voltage: -33 dBV/Pa (22.2 mV) 1 Pascal = 94 dB SPL Output Clipping Level (at 1,000 Hz, under 0.5% THD) 800 ohm load: -1 dBV (0.89 V) 150 ohm load: -12 dBV (0.25 V) Maximum SPL (at 1,000 Hz, under 0.5% THD) 800 ohm load: 127 dB SPL 150 ohm load: 119 dB SPL Hum Pickup Under 3 dB equivalent SPL in 1 mOe field (60 Hz) Output Noise 16 dB SPL typical, A-weighted Signal-to-Noise Ratio 79 dB re 94 dB SPL Dynamic Range 111 dB Phasing Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Power Phantom voltage: 11 to 52 Vdc; 2 mA current drain Low-Cut Filter 60 Hz(--) or 160 Hz (/-- ) Case Satin-black vinyl painted aluminum alloy handle and grille with stainless steel screen Dimensions See User Guide Environmental Conditions Operating Temperature: -29 to 57 degrees C (-20 to 135 degrees F) Relative Humidity (Operating): 0 to 95% Storage Temperature: -29 to 74 degrees C (-20 to 165 degrees F) Relative Humidity (Storage): Up to 80% at 74 degrees C (165 degrees F) Net Weight 195 grams (6.9 oz)

sm89-micro-canon-lectrostatique-
Nouveau produit